Short answer: Our Stella coffee table is a modular lift-top table in Oak or Walnut. One module is 60 cm (23.6 inches) square and 47 cm (18.5 inches) high when closed, and the top lifts to 67 cm (26.4 inches). You can start with one module and link more later.
The same table works as a low coffee table or as a higher surface for a laptop or a meal, and it is made of 18 mm MDF with a melamine finish and steel legs. Both heights are correct. Most coffee tables stay at one height. The Stella is for people who also use the table to work or eat, or who expect the lounge room to change.
On This Page
- How high is the Stella, and how does the lift-top work?
- What is a Stella module, and how big is each setup?
- Can I combine several Stella units?
- Which finishes, materials and care does the Stella have?
- What does the Stella go with?
- Who is the Stella for, and who is it not for?
- How does assembly work, and what arrives?
- Our recommendation
- Explore our tables
How high is the Stella, and how does the lift-top work?
The Stella coffee table has two heights. Closed, it stands 47 cm (18.5 inches) high. Lifted, it reaches 67 cm (26.4 inches). Our product page lists the full range as 47 to 67 cm (18.5 to 26.4 inches) and describes the lift-top surface as adjusting to a comfortable working height whenever you need it.
That range matters because our fixed-height coffee tables run from the Ombra at 33.9 cm (13.3 inches) to the Mensa at 41.5 cm (16.3 inches). Closed, the Stella is already higher than all of them. The extra height is what makes a laptop or a plate easier to reach than on a low table.
A common guideline is a coffee table level with the sofa seat or a little lower. That is general advice, not a product specification, so check your own seat height before you order. Our guide on how to choose a coffee table covers height, size and shape.
What is a Stella module, and how big is each setup?
A module is one Stella unit: a square table 60 cm (23.6 inches) on each side, with a lift-top surface and steel legs. You can buy one on its own, and our product page also shows setups of two, three and four modules. A single module is from $215 AUD on our product page.
What is a Stella module, and how big is each setup?
| Setup | Length | Width | Height |
|---|---|---|---|
| 1 module | 60 cm (23.6 inches) | 60 cm (23.6 inches) | 47 to 67 cm (18.5 to 26.4 inches) |
| 2 modules | 60 cm (23.6 inches) | 120 cm (47.2 inches) | 47 to 67 cm (18.5 to 26.4 inches) |
| 3 modules | 60 cm (23.6 inches) | 180 cm (70.7 inches) | 47 to 67 cm (18.5 to 26.4 inches) |
| 4 modules | 60 cm (23.6 inches) | 240 cm (94.5 inches) | 47 to 67 cm (18.5 to 26.4 inches) |
Every setup is 60 cm (23.6 inches) from front to back: only the width changes.
Can I combine several Stella units?
Yes. Our product page describes the Stella as built to expand: you connect additional units whenever you need more surface. One module suits a spot beside a chair or at the end of a sofa, two modules at 120 cm (47.2 inches) long suit a two-seat sofa, and three or four, at 180 cm (70.7 inches) and 240 cm (94.5 inches), suit a longer sofa or a sectional.
By the common two-thirds guideline, a sofa 213 cm (84 inches) long suits a table of about 142 cm (56 inches), so two modules would be slightly short and three slightly long. That is general advice, not a product specification. Our guide to pairing a sofa, accent chair and coffee table covers the wider layout.
Which finishes, materials and care does the Stella have?
Our Stella coffee table comes in two finishes, Oak and Walnut. The table unit is 18 mm MDF with a melamine finish, and the legs are powder coated steel. Oak is the lighter wood and keeps a room airy, while Walnut is deeper and gives a pale sofa something to stand out against. Our Tessella, Eclipse, Arca, Ombra and Mensa tables also come in both.
To care for it, dust with a soft, dry cloth, wipe stains gently with a damp cloth and mild soap, then dry right away. Avoid harsh cleaners and use coasters, because condensation left for a long time can damage the finish.
What does the Stella go with?
The closest match is our Stella media unit, which uses the same name and the same 18 mm MDF with a melamine finish, so a coffee table and a TV unit can share a finish. Read our Stella media unit guide for its sizes, doors and open storage.
The Stella is our smallest coffee table by footprint and the tallest of our coffee tables, which suits a studio or a small lounge room. Our guide to how to choose a credenza or media unit helps you plan the TV wall around it.
Who is the Stella for, and who is it not for?
The Stella suits you if you:
- Work or eat at the coffee table: the lift-top raises the surface for a laptop or a meal.
- Live in a small space: one module has a 60 cm (23.6 inches) footprint.
- Expect your needs to change: you can add modules later instead of replacing the table.
It may not suit you if you want built-in storage, because we do not list storage for the Stella. Our guide to coffee tables with storage compares the pieces that do. It is also not the best choice for a very low table, because it is 47 cm (18.5 inches) high even when closed, or for a single long surface, where our Tessella is one piece.
How does assembly work, and what arrives?
Assembly is mostly tool-free: the hardware includes hand screws and an Allen key. The table box measures 72 x 70 x 35 cm (28.3 x 27.6 x 13.8 inches) and weighs 24.4 kg, and the legs come in a small separate box. An assembly guide is on the product page, and our article on how long our furniture takes to assemble lists about 15 minutes per Stella table. The table is covered by our 5-year limited warranty.
Our recommendation
- One module: a small lounge room, a studio or a spot beside a chair.
- Two or three modules: the front of a sofa where you also want to work or eat at the table.
- Oak or Walnut: Oak for a lighter look, Walnut for more contrast with a pale sofa.
- Storage needed: choose a table with storage instead.
Explore our tables
Product specifications can change. Check the current dimensions on the product page before ordering.