Stella vs Solis: Which Cozey Table Is Right for You?

Short answer: Cozey's Stella is a lift-top coffee table for the middle of the seating area, and you can add modules. Cozey's Solis is a slim, height-adjustable steel side table for beside a sofa or a bed. Many rooms suit both.

Both tables are small and both change height, which is why shoppers compare them. They do different jobs, though: the Stella sits in front of the sofa, and the Solis sits beside it. Our Stella guide and Solis guide cover each in full. This page sets them side by side so you can decide which one your room needs first.

On This Page

1. How do the sizes compare?
2. Which is better for a small room or a narrow space?
3. Which one adjusts more, and how?
4. Which goes better with my sofa?
5. Which has more storage?
6. How do the finishes and materials compare?
7. Which is easier to assemble and move?
8. Which should I choose?
9. Our recommendation
10. Explore our tables

How do the sizes compare?

At Cozey, the Stella is the bigger table, with a square top of 23.5 inches on each side, while the Solis has a narrow top of 21.7 x 13.0 inches. The Stella can also grow by linking modules. The Solis is one fixed size.

How do the sizes compare?

A single Stella module is deeper than the Solis top by a wide margin: 23.5 inches against 13.0 inches. The Solis takes far less floor space, but it also offers a much smaller surface.

Which is better for a small room or a narrow space?

For a narrow gap, the Solis is the better fit, because its top is only 13.0 inches deep. It stays out of the walkway and slides in beside a sofa arm. Our side table guide suggests keeping about 30 to 36 inches clear where people walk, as general advice, and notes that the Solis base can slide under a sofa seat base.

For a small living room that needs a table in front of the sofa, the Stella is the compact choice among our coffee tables: one module takes up 23.5 inches of floor each way, and you can add a module later if the room changes. Our guide to how to choose a coffee table suggests leaving 14 to 18 inches between sofa and table.

If your room needs both, measure the walkway before you add the second table. We do not sell a classic nesting set, and our guide to nesting tables and space-saving side tables explains the alternatives.

Which one adjusts more, and how?

The Solis has the wider height range, moving through 10.0 inches against 7.9 inches for the Stella. A pneumatic cylinder with a 120 N gas piston carries the Solis top, and a handle under the top releases it so you can raise or lower it. We publish the two end positions, 20.7 inches and 30.7 inches, and not the number of stops between them.

The Stella works differently. Our Stella guide describes two heights: closed at 18.5 inches, and lifted to 26.4 inches, which our product page describes as a comfortable working height. So the Stella suits a laptop or a plate at the sofa, while the Solis suits matching a sofa arm or a mattress top.

Mind the load on the Solis. Our product page lists a static maximum load of 66.1 lb (30 kg) and a dynamic maximum load of 13.2 lb (6 kg), and as general advice you should clear the top before you change its height.

Which goes better with my sofa?

Match each table to the seat height, because that decides how it sits. As general advice, not a product specification, a coffee table sits level with the seat or a little lower, and a side table sits level with the arm or a little below it. Our guide to pairing a sofa, accent chair and coffee table covers the full layout.

At Cozey, we make four sofa collections and two sofa beds: Ciello (soft, deep cushions), Gaia (soft seat, high back), Cassini (curved and low, with a 45-degree wedge), Atmosphere (our deepest seat), plus Neptune and Orian. These seat heights come from our product guides.

Which goes better with my sofa?

The Stella closed sits a little above the lower seats and below the Ciello and Gaia seat, and lifting it raises it further. The Solis can be set to the sofa arm instead: our side table guide lists the Orian arm at 21.9 inches and the Neptune arm at 25.6 inches, and both fall inside the Solis range. To check how either table looks beside your sofa, build your sofa in Cozey Studio, where the overall dimensions show on screen, since Studio does not include tables.

For storage near the sofa, Altitude and Themis keep it on the wall, so neither table has to hold everything.

Which has more storage?

The Stella has storage in the gap between its lifted top and the base, while the Solis has none, with no drawer or shelf, so it suits a lamp, a drink or a laptop. If you want trays, compartments or shelves, our coffee tables with storage guide compares the Eclipse, Mensa, Arca and Ombra, which each list them, and our side table guide covers the drawer and shelf options.

How do the finishes and materials compare?

The Stella comes in Oak or Walnut wood finishes, and the Solis comes in powder-coated steel colors only. The Stella is 18 mm MDF with a melamine finish on powder coated steel legs. The Solis is 3 mm cold-rolled carbon steel for the top and cylinder, a 4 mm steel base and a plastic handle.

The Solis color range includes Wave, Dandelion, Thyme, Mushroom and Solstice, among others. Our product page is the place to see every color and its current availability.

Together, a wood Stella and a steel Solis give a room one natural tone and one accent. That is design advice, not a rule, and our guide to table finishes for a light-colored sofa goes further. Care for the Stella is simple: dust with a soft, dry cloth, wipe stains with a damp cloth and mild soap, dry right away and use coasters.

Which is easier to assemble and move?

They are equally quick: our assembly times guide lists about 15 minutes for each, and both are mostly tool-free because the hardware includes an Allen key and screws.

The Solis is the lighter parcel. It ships in one box of 25.4 x 15.7 x 5.9 inches, weighing 23.0 inches. A Stella module ships in one box of 28.3 x 27.6 x 13.8 inches, weighing 53.8 inches, plus a small box for the legs. For tight stairs or elevators, see will it fit.

Which should I choose?

Choose the Stella if:

• You want a coffee table in front of the sofa.
• You work or eat at the table and want a higher surface when you need it.
• You want to add modules later as the room changes.
• You prefer an Oak or Walnut finish.

Choose the Solis if:

• You want a table beside a sofa, a chair or a bed.
• You need a narrow top that stays out of the walkway.
• You want to set the height to a sofa arm or a mattress top.
• You like a steel color as an accent.

Our recommendation

At Cozey, we suggest the Stella if you need one table in front of the sofa, especially in a small or changing room or if you work or eat there. We suggest the Solis if you need a slim table at a sofa arm or a bed, or want a steel color accent that adjusts in height.

If you still need both, start with the table you will use daily. Read our guide to how to choose a coffee table or how to choose a side table, then check your sofa's size in Cozey Studio, which does not include tables.

Explore our tables

• Coffee tables
• Side tables
• Stella coffee table guide
• Solis side table guide

More Cozey comparisons: Stella vs Tessella, Stella vs Eclipse, Stella vs Arca, Stella vs Ombra, Stella vs Mensa, Tessella vs Solis, Eclipse vs Solis, Arca vs Solis, Ombra vs Solis, Mensa vs Solis.

Product specifications can change. Check the current dimensions on the product page before ordering.