Skip to main content
Guides

What Size Bed Fits Your Bedroom? Ara Bed Sizes Against Room Dimensions

Which Ara bed size suits your room: bed and headboard widths, the floor left at the foot, and the sums for five common room sizes.

Updated November 18, 20267-min ReadCozey Editorial
A Cozey Ara bed

Short answer: Cozey's Ara bed comes in Full, Queen and King. With a Round or Square headboard they are 66.8, 73.1 and 86.9 inches wide, so subtract that from the wall behind the bed to see the space left beside it.

A bed that suits the mattress can still crowd the room, and fit comes down to two subtractions: wall width minus headboard width, and room depth minus bed depth. This page does both sums for common room sizes, using our published bed sizes and the clearance guidelines in our other bedroom guides.

On This Page

  1. How much room does each Ara bed size take?
  2. How do I check whether a bed size fits my room?
  3. Which bed size fits my room size?
  4. How does the headboard style change the fit?
  5. Do nightstands and storage drawers need a bigger room?
  6. Our recommendation
  7. Explore our bedroom range

How much room does each Ara bed size take?

At Cozey, we make the Ara bed in three sizes, and the headboard, not the frame, is the widest part of the bed, so plan around the headboard. Queen and King are the same depth, so a bigger bed adds width, not length. Sizes with a Round or Square headboard, unless stated:

How much room does each Ara bed size take?

SizeFrame width (no storage)Headboard widthBed depthBed depth with Pillow headboard
Full62.4 in66.8 in83 in87.5 in
Queen68.3 in73.1 in88 in92.5 in
King82.9 in86.9 in88 in92.5 in

Round and Square share one width, the Pillow headboard is narrower but 4.5 in deeper, and the Extended headboard is far wider and slightly shallower than Round. Our Ara bed sizes guide lists every headboard, and our mattress compatibility guide covers mattress thickness.

How do I check whether a bed size fits my room?

Measure the room, subtract the bed, then compare what is left with the clearance guidelines below. The steps:

1. Measure the wall behind the headboard and the room depth from that wall to the opposite wall.

2. Subtract the headboard width from the wall width. The result is the space beside the bed, for both sides together.

3. Subtract the bed depth from the room depth. The result is the floor left at the foot of the bed.

4. Compare with the guidelines. As general advice from our bedroom furniture for tight spaces guide, leave 24 in to 36 in beside the bed on the side you get in and out, and at least 30 in at the foot and along main paths, with 36 in more comfortable.

5. Subtract any nightstand. Take its width off the space beside the bed, and keep clear the door swing and, on a storage frame, the side drawers.

The two wall widths below are our arithmetic: headboard width plus the space beside the bed.

How do I check whether a bed size fits my room?

SizeWall for 24 in on one sideWall for 24 in on each side
Full90.8 in114.8 in
Queen97.1 in121.1 in
King110.9 in134.9 in

Which bed size fits my room size?

A Full fits the most rooms, and Queen and King mostly need a wider wall. The tables below use a Round or Square headboard. Rooms are listed as wall behind the headboard by room depth, and the beside figure is for both sides together.

Which bed size fits my room size?

Room (wall x depth)Full: space beside the bedQueen: space beside the bedKing: space beside the bed
8 x 10 ft29.2 in22.9 in9.1 in
10 x 10 ft53.2 in46.9 in33.1 in
10 x 12 ft53.2 in46.9 in33.1 in
11 x 12 ft65.2 in58.9 in45.1 in
12 x 12 ft77.2 in70.9 in57.1 in
Room (wall x depth)Full: floor at the footQueen: floor at the footKing: floor at the foot
8 x 10 ft37 in32 in32 in
10 x 10 ft37 in32 in32 in
10 x 12 ft61 in56 in56 in
11 x 12 ft61 in56 in56 in
12 x 12 ft61 in56 in56 in

Reading those against the guidelines gives the verdicts below. Both sides means at least 24 in on each side, which is 48 in in total, one side means at least 24 in on one side and less than 48 in in total, and the foot is comfortable at 36 in or more and a minimum at 30 in.

Which bed size fits my room size?

Room (wall x depth)FullQueenKing
8 x 10 ftone side, comfortable foottoo tight, minimum foottoo tight, minimum foot
10 x 10 ftboth sides, comfortable footone side, minimum footone side, minimum foot
10 x 12 ftboth sides, comfortable footone side, comfortable footone side, comfortable foot
11 x 12 ftboth sides, comfortable footboth sides, comfortable footone side, comfortable foot
12 x 12 ftboth sides, comfortable footboth sides, comfortable footboth sides, comfortable foot

In the smallest room, 8 x 10 ft, only a Full leaves 24 in beside the bed, with 29.2 in left over in total. The 11 x 12 ft room is the first where a Queen leaves 24 in on each side, and 12 x 12 ft is the first for a King. Our guide to minimalist bedroom layouts and the bedroom furniture for tight spaces guide work through whole rooms with nightstands.

How does the headboard style change the fit?

The headboard changes both sums, so choose it with the wall in mind. For a Queen in a 10 x 12 ft room, the three headboard families compare like this:

How does the headboard style change the fit?

HeadboardWidthBed depthSpace beside the bedFloor at the foot
Round or Square73.1 in88 in46.9 in56 in
Pillow69.5 in92.5 in50.5 in51.5 in
Extended115.6 in87.75 in4.4 in56.25 in

The Pillow headboard gives the most room beside the bed and costs the most floor depth. The Extended headboard leaves only 4.4 in on the 10 ft wall, so it suits a wide wall, not a tight one. Our headboard style guide compares the looks.

Do nightstands and storage drawers need a bigger room?

Yes, both take space from the sum, so subtract them before you compare. Take the width of any nightstand you choose off the space beside the bed. For example, a 17-inch nightstand beside a Queen on a 10-foot wall leaves 29.9 in of the 46.9 in beside the bed. The storage frame is wider than the standard frame, at 63.9 in for a Full, 70 in for a Queen and 84.2 in for a King, and its drawers open to the side, so keep that floor clear. Our Ara storage guide gives the drawer sizes.

Our nightstand guide covers height and width in more detail.

Our recommendation

Cozey's Ara bed fits the room when the wall behind the headboard is the headboard width plus 24 in for one side, and more if you want both sides clear.

  • A narrow wall, about 8 x 10 ft: a Full, which leaves 29.2 in beside the bed, or a Full with the Pillow headboard for a little more.
  • A 10 x 12 ft room: the Full leaves 24 in on each side, and the Queen and King leave 24 in on one side.
  • A 12 x 12 ft room: any of the three sizes, with 24 in on each side.
  • Any room: compare the floor at the foot with 30 in to 36 in, and add your nightstand width to the sum.

Measure twice, then check the product page for the current sizes. For a second opinion on a tight room, you can book a free design consultation. Our measuring guide shows how to check the route into the room.

Explore our bedroom range

Product specifications can change. Check the current dimensions on the product page before ordering.

Frequently Asked Questions

In a 10 x 10 ft room, Cozey's Ara bed with a Round or Square headboard leaves 53.2 in beside a Full, 46.9 in beside a Queen and 33.1 in beside a King. That is 24 in on each side for the Full, and on one side for the Queen and King. At the foot, a Full leaves 37 in and a Queen or King 32 in, above the 30 in minimum but under the more comfortable 36 in. These sums are general advice, not a product specification.


A King Ara has a Round or Square headboard 86.9 in wide, so Cozey's King needs a wall of at least 110.9 in to leave 24 in on one side, and 134.9 in for 24 in on both sides. On the 8 ft wall of our smallest room, a King leaves only 9.1 in. A Queen needs 97.1 in and a Full 90.8 in for the same 24 in, so on a short wall a smaller size is the fit.


As general advice from our bedroom guides, leave 24 in to 36 in beside the bed on the side you get in and out, and at least 30 in at the foot and along main paths, with 36 in more comfortable. At Cozey, we turn that into two sums for the Ara bed: headboard width plus the space beside the bed gives the wall you need, and bed depth plus the foot space gives the room depth. Our Ara bed sizes guide lists every headboard.


For a narrow wall, Cozey's Full Ara bed is the easier fit, because its Round or Square headboard is 66.8 in wide against 73.1 in for a Queen. On a 8 ft wall, a Full leaves 29.2 in beside the bed and a Queen leaves 22.9 in. The Pillow headboard is narrower again, at 69.5 in in a Queen, but it adds 4.5 in of depth, so check the floor at the foot as well.


Yes. At Cozey, the Ara headboard is chosen separately from the frame, and it sets the width and depth of the finished bed. For a Queen in a 10 x 12 ft room, Round or Square leaves 46.9 in beside the bed and 56 in at the foot, Pillow leaves 50.5 in and 51.5 in, and Extended leaves 4.4 in and 56.25 in. Choose Pillow for a short wall and Extended for a wide one.


Cozey's Ara bed fits a 12 x 12 ft room in all three sizes with a Round or Square headboard: a Full leaves 77.2 in beside the bed, a Queen 70.9 in and a King 57.1 in, each above the 48 in needed for 24 in on each side. The foot has 61 in for a Full and 56 in for a Queen or King, above 36 in. Subtract the width of any nightstand before you decide.

Explore Cozey's Ara Bed

Shop Ara Today