Skip to main content
Guides

What Size Bedside Table for Your Bed? Heights and Widths Against Mattress Height

Match a bedside table to your mattress with the heights of our Ara bed, our two mattresses and our Talus nightstand, worked out side by side.

Updated 18 November 20265-min ReadCozey Editorial
A Cozey Talus nightstand

Short answer: At Cozey, we size a bedside table by height first: its top should be level with the top of your mattress, or a little below it. On an Ara bed with our Foam mattress, the sleeping surface works out to about 49.5 cm (19.5 inches), and with our Hybrid mattress to about 55 cm (21.7 inches). Our Talus nightstand is 55 cm (21.7 inches) high, so it is level with an Ara bed and our Hybrid mattress, and 5.5 cm (2.2 inches) above it with our Foam mattress.

Height decides whether a bedside table is easy to reach, and width decides how much wall it needs beside the bed. This page sets the numbers next to each other so you can read the difference for your own bed. Our bedside table guide covers drawers, style and floor clearance.

On This Page

  1. How high should a bedside table be compared with my mattress?
  2. Does the Talus match my mattress height?
  3. What width and footprint does a bedside table need?
  4. What are the Talus details before I choose?
  5. Our recommendation
  6. Explore our bedroom range

How high should a bedside table be compared with my mattress?

A common guideline is a top level with the top of your mattress, or a little below it, so that a glass, a phone or a lamp switch is within reach while you lie down. That is general advice, not a product specification, and our side table guide gives the same rule. Measure your own bed from the floor to the top of the mattress first.

For our own bed, we can work it out from published sizes. The Ara bed frame is 37 cm (14.6 inches) tall, and the side panels stand 12.5 cm (4.9 inches) above the slats, so the slats sit about 24.5 cm (9.6 inches) from the floor. Ara storage frames are the same 37 cm (14.6 inches) tall. Our Foam mattress is 25 cm (10 inches) thick and our Hybrid mattress is 30.5 cm (12 inches).

How high should a bedside table be compared with my mattress?

BedMattressSleeping surface from the floor
Ara frame, with or without storageFoam, 25 cm (10 inches)About 49.5 cm (19.5 inches)
Ara frame, with or without storageHybrid, 30.5 cm (12 inches)About 55 cm (21.7 inches)

These are estimates from the frame and mattress sizes, so check them against your own bed.

Does the Talus match my mattress height?

The Talus is 55 cm (21.7 inches) high. Subtracting the sleeping surface from that height gives the gap between the bedside table top and the mattress top.

Does the Talus match my mattress height?

Bed and mattressSleeping surfaceTalus, 55 cm (21.7 inches)
Ara, Foam49.5 cm (19.5 inches)5.5 cm (2.2 inches) above
Ara, Hybrid55 cm (21.7 inches)Level

With the Hybrid mattress the Talus lines up exactly with the mattress top. With the Foam mattress its top sits 5.5 cm (2.2 inches) higher, which is the larger of the two gaps. The Talus is reversible, with the drawer on top or at the bottom, and its overall height is the same either way. Our Talus guide shows both layouts.

What width and footprint does a bedside table need?

The Talus is square, 43.5 x 43.5 cm (17.1 x 17.1 inches). Two Talus nightstands add 87 cm (34.3 inches) to the width of the bed.

The headboard is wider than the frame, so measure the wall from the outside edge of the headboard. With the Round or Square headboard:

What width and footprint does a bedside table need?

Ara sizeHeadboard widthWith two Talus
Full169.6 cm (66.8 inches)256.6 cm (101.0 inches)
Queen185.6 cm (73.1 inches)272.6 cm (107.3 inches)
Australian King212.4 cm (83.6 inches)299.4 cm (117.9 inches)

These totals place the bedside tables outside the headboard with no gap, so they are the least wall you can plan for. Our Ara size guide lists the other headboard widths, and our headboard style guide compares Round, Square, Pillow and Extended. For a narrow room, see bedroom furniture for tight spaces.

What are the Talus details before I choose?

The Talus is made of ash wood veneer over MDF and comes in Oak and Walnut, from AUD $310. It takes about 30 minutes to assemble. Our bedside tables page shows it.

Our recommendation

At Cozey, we suggest choosing by your mattress first, then by the wall.

  • Ara with the Hybrid mattress: the Talus, which is level with the mattress top.
  • Ara with the Foam mattress: the Talus sits 5.5 cm (2.2 inches) above the mattress top, the larger of the two gaps.
  • A narrow wall: allow 87 cm (34.3 inches) for a pair of Talus nightstands, plus the headboard.
  • Not sure: measure from the floor to your mattress top and compare it with 55 cm (21.7 inches).

Explore our bedroom range

Product specifications can change. Check the current dimensions on the product page before ordering.

Frequently Asked Questions

At Cozey, we size a bedside table by height first and by wall space second. The bed size does not change the height, but it sets the wall you share. A Queen Ara with a Round or Square headboard is 185.6 cm (73.1 inches) wide, so two Talus nightstands need 272.6 cm (107.3 inches) of wall. For height, aim for a top level with the mattress or a little below it. Our Talus is 55 cm (21.7 inches) high, which is level with a Queen Ara and our Hybrid mattress.


At Cozey, our Hybrid mattress is 30.5 cm (12 inches) thick, which puts the sleeping surface of an Ara bed at about 55 cm (21.7 inches). Our Talus is 55 cm (21.7 inches) high, so it is level with that surface. These are estimates from published sizes, because the frame is 37 cm (14.6 inches) tall and the side panels stand 12.5 cm (4.9 inches) above the slats. Measure your own bed from the floor to the top of the mattress to confirm.


At Cozey, our Foam mattress is 25 cm (10 inches) thick, so the sleeping surface of an Ara bed is about 49.5 cm (19.5 inches) from the floor. Our Talus at 55 cm (21.7 inches) sits 5.5 cm (2.2 inches) above it. A common guideline is a top level with the mattress or a little below it, and that is general advice, not a specification. Measure your own bed first, and keep in mind that the gap with the Foam mattress is the larger one.


At Cozey, we follow a common guideline that a bedside table top should be level with the mattress top or a little below it, so you can reach it lying down. That is general advice, not a specification. A top well above the mattress is the case to avoid. In our own pairings, the largest gap is 5.5 cm (2.2 inches), the Talus beside an Ara bed with the Foam mattress. The Talus lines up exactly with an Ara bed and the Hybrid mattress.


At Cozey, we add the bedside table widths to the headboard width, measured from the outside edge of the headboard. Our Round or Square Ara headboard is 169.6 cm (66.8 inches) wide in Full, 185.6 cm (73.1 inches) in Queen and 212.4 cm (83.6 inches) in Australian King. Two Talus nightstands add 87 cm (34.3 inches), giving 256.6, 272.6 and 299.4 cm (101.0, 107.3 and 117.9 inches) of wall. Add more if you leave a gap between the headboard and each table.


At Cozey, yes. Our Talus nightstand is 43.5 x 43.5 x 55 cm (17.1 x 17.1 x 21.7 inches), and it is reversible, so you can place the drawer on top with open storage below, or the other way around. The overall height stays at 55 cm (21.7 inches) either way. It comes in Oak and Walnut, starts from AUD $310, and takes about 30 minutes to assemble. Check the current details on the product page before you order, and measure the wall beside your bed first.

Explore Cozey's Ara Bed

Shop Ara Today