Skip to main content

Your Cart

There are no items in your cart.

Guides

Sofa Bed Sizes Explained: The Measurements That Actually Matter

Updated 27 October 20265-min ReadFred Aubé, CEO
Woman having breakfast on an opened green Cozey Orian sofa bed

Australian bedding sizes are not interchangeable with North American labels. A Cozey configuration named “Full” is not automatically identical to an Australian Double mattress. The safest starting point is the sleeping surface measured in centimetres.

Short answer: Measure three different things: the sofa's closed external dimensions, its fully extended external footprint, and the usable sleeping surface. Only the third tells you how much room a sleeper has; only the second tells you whether the furniture fits the room at night.

On This Page

  1. Bed names are useful shorthand, not measurements
  2. Cozey sleeper examples: actual sleeping surfaces
  3. How to choose fitted sheets without guessing
  4. Comparing Australian Double and Queen bedding
  5. External sofa width is not bed width
  6. A small measurement worksheet
  7. The bottom line

Bed names are useful shorthand, not measurements

On a regular bed, a mattress label generally follows a common size convention. On a modular sleeper, the name may refer to the nearest familiar size even if the surface is created from unusual modular sections. A taller person also needs to know which direction the longest dimension runs, and shoppers buying sheets need to know the perimeter the fitted sheet must stretch around.

In Australia, common mattress references include Australian standard Single (~92 × 188 cm), Double (~138 × 188 cm) and Queen (~153 × 203 cm) mattresses. Those are comparison dimensions, not measurements of the Cozey products.

Cozey sleeper examples: actual sleeping surfaces

Cozey sleeper examples: actual sleeping surfaces

Example configurationApprox. sleep surface (width × length)Product naming / local interpretation
Neptune three-seat Full144 × 192 cm (56.7 × 75.6 in)Named Full; wider/longer than typical Australian Double (138 × 188 cm)
Neptune Single + ottoman64 × 196 cm (25.2 × 77.2 in)Narrower than a standard Australian Single (92 × 188 cm)
Orian two-seat Queen157 × 202.5 cm (61.8 × 79.7 in)Similar to Australian Queen (153 × 203 cm), not identical
Atmosphere three-seat Sleeper150 × 225 cm (59.1 × 88.6 in)Configuration-specific, non-standard

About these measurements: Quoted product dimensions are approximate examples of named configurations, not universal dimensions for every arm, ottoman or module arrangement. Confirm the live configurator dimensions and bedding fit for the exact combination you select.

For Neptune, the three-seat Full is a useful reference layout. A compatible Single layout using a sleeper section and ottoman is much narrower but longer. Orian produces a Queen-labelled surface from just two sleeper seats. Atmosphere Sleeper is more flexible in arrangement, but its surface is generally non-standard; use its specified configuration dimensions rather than buying bedding by a Queen or Full label.

Diagram: The sleep surface is only part of the unfolded furniture. External arms, frames and required room circulation are additional considerations. Schematic, not to scale.

How to choose fitted sheets without guessing

A fitted sheet needs more than nominal length and width. The elastic must accommodate the actual perimeter and depth of the surface and, in some cases, the way modules meet. Before ordering bedding, check:

  1. Surface width and length, in the actual sleeping direction.
  2. Thickness and edge shape of the opened surface (some sofa beds do not form a conventional mattress block).
  3. Sheet pocket depth and elastic range instead of relying only on “Queen” or “Full” on a label.
  4. Any added ottomans or sleeper modules, which can change the overall length or shape.
  5. The manufacturer's matched kit, where a non-standard layout makes generic bedding unreliable.

Cozey's Neptune Sleep Kit includes a padded mattress topper, fitted and flat sheets, a comforter and pillows in supported kit sizes. The topper softens the feel of transitions between sleeper sections. Check the current local kit selection for your chosen layout; not every expanded custom bed has standard-sized matching sheets.

Comparing Australian Double and Queen bedding

An Australian Double mattress is typically about 138 × 188 cm, while Cozey’s Neptune Full sleeping surface is approximately 144 × 192 cm—not an exact Double. An Australian Queen is usually 153 × 203 cm; the Orian two-seat Queen sleeping surface is about 157 × 202.5 cm, very close in length but slightly wider. The Neptune Single-with-ottoman layout is around 64 × 196 cm, far narrower than an Australian Single of about 92 × 188 cm. “Full” is the Cozey product name, not an Australian bedding size.

External sofa width is not bed width

A closed Orian two-seater, for example, is about 185 cm (72.75 in) wide, while its named Queen sleeping surface is approximately 157 cm (61.75 in) wide. The difference is not a mistake: arms and frame are part of the sofa's external width. For room planning, use the widest exterior point; for sleeping comfort and fitted sheets, use the actual sleep surface.

Likewise, a Neptune Full sleeping width of around 144 cm does not mean the three-seat sofa is only 144 cm wide—it is about 228 cm wide externally. A single number cannot answer every sizing question.

A small measurement worksheet

A small measurement worksheet

MeasurementWhat to recordWhy it matters
Closed external width/depthEntire sofa, including arms and backsEveryday floor plan
Open external width/depthFurthest extended furniture edgesWhether the door and walkway remain usable
Sleep surface width/lengthActual flat surface available to guestsHow many people and how tall
Sleep surface heightFloor to top of sleeping surfaceEase of getting in and out
Bedding compatibilityFitted sheet and topper measurementsWhether the bed can be made neatly

The bottom line

The most reliable sofa-bed size guide is a dimension guide, not a name guide. Record the closed sofa, the fully opened furniture and the usable sleep surface separately. Then compare local bedding standards to the actual measurements—not the marketing label alone.

Editorial references and product specifications

Frequently Asked Questions

The words may be used interchangeably in some markets, but no: the actual sleeper-surface measurements are what matter. In Australia, it is particularly important not to equate a Cozey Full with an Australian Double.


No. Orian's two-seat configuration creates a Queen-labelled sleeping surface, while Neptune uses three sleeper seats for its typical Full. The mechanisms are different.


Often, appropriately sized Queen bedding can work on the base two-seat Orian layout, but its actual dimensions are approximately 157 × 202.5 cm, so check the elastic and fit. A matched topper and kit can be simpler.


Its flexible sleeping arrangements frequently create non-standard surfaces. Compare exact dimensions and consider compatible bedding instead of assuming a standard mattress size.

Australian note: A Cozey “Full” is not automatically the same as an Australian Double.


No. A closed Orian two-seater is about 185 cm (72.75 in) wide, while its Queen sleeping surface is approximately 157 cm (61.75 in) wide, because the arms and frame are part of the sofa's external width. Use the widest exterior point for room planning and the actual sleep surface for sleeping comfort and fitted sheets.

Explore Cozey's Sofa Beds

Shop Sofa Beds Today